Using Electric Locks And Other Devices; Using Electric Locks; Using Sensors; Panasonic Pbx Integration - Panasonic VL-SVN511 Series Operating Instructions Manual

6. Using electric locks and other devices

6.1 Using electric locks

When a commercially available electric lock is connected
to the main monitor, you can unlock a door or gate using
the main monitor. You can also select how long the door
or gate remains unlocked.
R A maximum of 2 electric locks can be connected to
the main monitor. When you use an additional
doorphone, the maximum number of the electric
locks that can be connected to the doorphone
depends on the type of doorphone. Consult your
dealer for further information.
R For detailed information about connections, see the
operating instructions included with the electric lock
and the Installation Guide of this product.
6.1.1 Configuring electric locks
1
Top menu ® ®
2
Select "Connected devices" ®
3
Select "Electric lock" ®
R If there are multiple doorphones, select the
doorphone to be configured ®
4
Select the doorphone ("Doorphone 1" or
"Doorphone 2") that you want to assign the electric
key to ®
.
5
Select the type of the electric lock ®
6
Select the device that the electric key is connected to
®
.
7
Select the unlocking time ®
8
Press M N.
Note:
R The "Unlocking buzzer sound" setting
determines whether a buzzer is heard when the door
is unlocked. See page 20.
Electric key settings
Options listed below are available.
"Unlocking buzzer sound":
Determines whether the doorphone sounds a buzzer
when the electric key is unlocked. See page 20.
"Extend the time when unlock":
Determines whether to extend the displaying time of the
doorphone image when the electric key is unlocked. See
page 20.
6.1.2 Unlocking electric locks
1
Press while talking or monitoring.
R If there are 2 electric locks available, select the
electric lock to be unlocked ®
to unlock another electric key.
16
.
.
.
.
.
.
® press
Note:
R You can only unlock the door or gate when talking or
monitoring.
R When using multiple electric locks with different
doorphones, you can only operate the locks from the
doorphone that they are connected to.

6.2 Using sensors

When commercially available sensors (such as a fire
alarm, calling button, etc.) are connected to the main
monitor, you can receive notifications on the main
monitor if the sensors are triggered.
R A maximum of 2 sensors can be connected to the
main monitor.
R For detailed information about connections, see the
operating instructions included with the sensor and
the Installation Guide of this product.
6.2.1 Stopping an alarm
When a connected sensor is triggered, the main monitor
sounds an alarm and displays a message indicating
which sensor was triggered.
The alarm sounds for 3 minutes.
1
To stop an alert, press M
R The alarm cannot be stopped during the first 5
seconds.
Note:
R When performing maintenance on connected
sensors, check that the main monitor can correctly
receive alarms from the sensors.
R If a sensor is triggered when you are monitoring or on
call, the main monitor ends the monitoring or the call.
R The main monitor cannot receive calls while the
alarm is sounding.

6.3 Panasonic PBX integration

This feature is available for AZ models only.
Connecting the main monitor to a PBX allows you to use
PBX extensions to answer doorphone calls.
Please use only a Panasonic PBX (page 4).
R For detailed information about connections, see the
operating instructions included with the PBX and the
Installation Guide of this product.
Note:
R If you answer a doorphone call with a PBX extension,
the doorphone camera image will be displayed on the
main monitor, and
a PBX extension is on the call.
R While is displayed, you cannot answer calls
using the main monitor.
R The display will turn off when the call between the
doorphone and the PBX extension ends, or after 3
minutes.
N.
is displayed to indicate that