3.3 PT Programming
Note
This programme selects the ringback tone pattern for outgoing intercom calls and for incoming outside
(CO) line calls (including a DISA call).
Feature & Programming References
1.5.1.1 Intercom Call
1.15.6 Direct Inward System Access (DISA)
4.2.1 Tones/Ring Tones
VM 1 APT Port [130]
1
3
0
Notes
•
To change the current setting (other than "Disable"), select "Disable", then select the desired
setting.
•
This programme is not available when "Enable" is selected in DTMF Integration [103].
Feature & Programming References
1.19.1 Voice Mail APT Integration
VM 2 APT Port [131]
1
3
1
Notes
•
To change the current setting (other than "Disable"), select "Disable", then select the desired
setting.
•
This programme is not available when "Enable" is selected in DTMF Integration [103].
Feature & Programming References
1.19.1 Voice Mail APT Integration
SLT Ring/Silence Ratio [142]
1
4
2
Note
This programme selects the ratio between the bell signals of an SLT (a set of bell-on and bell-off).
206
Feature Guide
NEXT
SELECT
(Port7/Port7 & 8/
Disable)
NEXT
SELECT
(Port15/
Port15 & 16/
Disable)
NEXT
SELECT
(1:2/1:3/1:4)
[On:Off]
STORE
END
STORE
END
STORE
END