Group - Panasonic KX-TEM824 Features Manual

2.2 System Configuration—Software
2.2.2

Group

Description
This PBX supports various types of groups.
1.
Outside (CO) Line Group
Outside (CO) lines can be grouped into 8 outside (CO) line groups based on properties such as carrier
or outside (CO) line type (
Each outside (CO) line can belong to only one outside (CO) line group.
2.
Extension Group
Extensions can be grouped into 8 extension groups (
Each extension group can have the following attribute set:
a)
Call Pickup Group
b)
Paging Group
c)
Idle Extension Hunting Group
d)
Uniform Call Distribution (UCD) Group
e)
Direct Inward System Access (DISA) Ring Group
Every extension must belong to one extension group and cannot belong to more than one extension
group.
Assignable Extensions: Proprietary telephones (PTs)/single line telephones (SLTs)
[Example]
Extension Group 1
Extn. 101 Extn. 102
2.1.
Call Pickup Group
Using the Call Pickup feature, extensions can answer any calls within the call pickup group to which
they belong.
2.2.
Paging Group
Using the Paging feature, extensions can make a page to any paging group, or answer a page
made to any group.
2.3.
Idle Extension Hunting Group
If a called extension is busy, Idle Extension Hunting redirects the incoming call to an idle member
of the same extension group (
extensions are automatically searched for according to a preprogrammed hunting type (
Type [101]): Circular Hunting or Terminated Hunting.
2.4.
Uniform Call Distribution (UCD) Group
A UCD group is a group of extensions that receives UCD calls directed to the group (
[520]). To use this feature, "UCD" must be selected as the distribution method for the desired
outside (CO) line port (
162 Feature Guide
CO Line Group Number [404]).
Extension Group 2 Extension Group 3
Extn. 103 Extn. 104 Extn. 105 Extn. 106
Hunting Group Set [100]). When calls are received, idle
CO Line Mode—Day/Night/Lunch [414-416]).
Extension Group [600]).
Extension Group 4
Extn. 107 Extn. 108
Hunting
UCD Group