Proprietary Telephone (Pt) Features; Fixed Buttons - Panasonic KX-TEM824 Features Manual

1.18 Proprietary Telephone (PT) Features

1.18.1 Fixed Buttons

Description
Proprietary telephones (PTs) and Direct Station Selection (DSS) Consoles feature a wide variety of feature
buttons and Line Access buttons, explained below.
Note that certain models do not have certain buttons.
For a description of the buttons found on each PT or DSS Console, please refer to the Operating Instructions
for each PT or DSS Console.
[PT]
Button
Navigator Key,
Volume Key
PROGRAM
FLASH/RECALL
HOLD
SP-PHONE
(Speakerphone)
MONITOR
MESSAGE
REDIAL
TRANSFER
Flexible CO
INTERCOM
AUTO ANS (Auto
Answer)/MUTE
VOICE CALL
AUTO DIAL/STORE
Used to adjust the volume of the speaker, handset and headset, and the display
contrast, or to select desired items.
Used to enter and exit programming mode.
Used to disconnect the current call and make another call without hanging up
(Flash/Recall mode), or to send an EFA (External Feature Access) signal to the
telephone company or host PBX to access external features (EFA mode).
Used to place a call on hold.
Used to select handset or hands-free operation.
Used to select hands-free dialling and monitor operation.
Used to leave a message waiting indication, call back the party who left a
message waiting indication, or play back voice messages. This button is
provided with an LED (Light Emitting Diode), except for on KX-T7700 series
telephones. With KX-T7700 series telephones, the Message/Ringer Lamp is lit
when a message waiting indication is left at an extension.
Used to redial the last number dialled.
Used to transfer a call to another party.
Used to access an outside (CO) line (or outside (CO) line group) when making
or receiving a call. The button's preprogrammed Outside (CO) Line Access
method determines which line is selected (Default: Single-CO [S-CO]). Can also
be customised as a feature button.
Used to make or receive intercom calls.
Used to answer an intercom call automatically in hands-free mode, or to mute
the built-in microphone during a conversation.
Used to answer an intercom call automatically.
Used for System Speed Dialling/Saved Number Redial, playing back personal/
common BV outgoing messages (OGMs) used by the Built-in Voice Message
(BV) feature, and storing programme changes.
1.18 Proprietary Telephone (PT) Features
Function
Feature Guide 133