Table of Contents
Advertisement
Default Key (Key index)
Key Format
WEP Key
WPA Preshared Key
Show Password
When all required parameters are s
4.1.2 Remove an existing p
If you want to remove a profile no
existing profile you wish to remove, an
keys.
TKIP – TKIP (Temporal Key Integrity Protocol) changes the
temporal key every 10,000 packets (a packet is a kind of
message transmitted over a network.) This insures much
greater security than the standard WEP security.
AES – AES has been developed to ensure the highest degree
of security and authenticity for digital information and it is the
most advanced solution defined by IEEE 802.11i for the
security in the wireless network.
N
ote: All devices in the network should use the same
encryption method to ensure the communication.
Select WEP key index. For most of access points you can
select "1", but please refer to the setting of the access point.
When the encryption type is "WEP", it's required to input a set
of "passphrase" to connect to wireless access point. Check
"ASCII" or "PASSPHRASE" depends on the security setting of
access point, and input it in the box; if you select
"PASSPHRASE" you also need to select the len
The passphrase must be identical with the setting of wireless
access point you with to connect.
The WEP keys are used to encrypt data transmitted in the
wireless network.
The WPA-PSK key can be from 8 to 64 characters and can be
letters or numbers. This same key must be used on all of the
wireless stations in the network.
Check this box and all passphrases or security keys yo
inputted will be displayed as you type, but not replace your
input with asterisk.
et, click "
Right arrow" icon to create and save a new profile.
rofile
lo
nger needed, click "Profile Settings" button, then select the
d click "Delete" icon.
38
gth of the key.
u
Advertisement
Table of Contents
