Table of Contents
Advertisement
Use the About screen to find version information for your Utility.
B. Use these buttons and icons to manage transmission and to find information about your
wireless connection.
Click this button to enable or disable wireless transmission.
Indicates the security status of your connection.
Indicates the quality of your wireless connection.
C. Use this screen to find information on wireless network settings.
SSID
This shows the name of your wireless network.
Rate
This shows the speed of your connection.
This is the channel assigned to your connection. Change this if interference is a
Channel
problem on your network.
This identifies the Adapter on your wireless network; much like a physical mailing
IP Address
address identifies a house on a street.
Mask
The subnet mask hides your IP address from outside your wireless network.
D. Lets you change the operation mode of the Utility.
Launch Config
Select this option to display the Utility's main screen.
Utility
(Windows XP only) Select this option to use Windows to set up and manage your
Use Zero
network connection. Selection of this mode is not necessary in Windows Vista, 7
Configuration as
or higher, as you can use Windows and the Utility to manage the Adapter without
Config Utility
changing operating modes.
(Windows 7 and higher only) Select this option to let computers and devices
Switch to Client +
connected to the AP access the Internet (or another network to which the AP is
AP Mode
connected).
Switch to AP
Select this option to use the Utility as an access point and to set up a wireless
Mode
network of your own.
Select this option to close the main screen and exit the program. Any wireless
Exit
connections managed by the Utility will be disconnected.
12
Advertisement
Table of Contents
