You'll be prompted to input connection parameters for the wireless access point you wish to connect:
Required parameters are as follows:
Object
Profile name
Network Name (SSID)
Infrastructure –
Connect to AP
Ad-Hoc – Connect to
other computers
Authentication
Description
You can give a name to this profile, so you can remember its
purpose easily. It can be any phrase to help you remember.
The SSID (Service Set Identifier, i.e. access point's name).
This field will be filled as the access point you selected when
SSID is not hidden and grayed out. If SSID is hidden, you
have to input correct SSID you yourself.
This operation mode requires the presence of an 802.11
Access Point. All communication is done via the Access Point
or Router.
Check this box if you wish to connect to another computer /
network device by ad-hoc method. When not accessing to
wireless access point, you have to check this box.
Select the authentication type from drop-down menu. This
setting must be identical with the setting of wireless access
point you with to connect.
Open – No authentication is needed among the wireless
netwo
rk.
36