Table of Contents
Advertisement
"
-""
.,
XCH6RF
JENSEN
111
Wiring
Important
If wiring connections are made wrong, the unit will not operate properly and
it
could be damaged.
Follow the installation instructions carefully, or have the installation handled by an experienced
technician.
.
Connections
Good wire connections are very Important lor
best sound and long-term reliability. Here are
two methods:
Splice
1. Strip
1/2
inch (12 mm) of insulation from
both wires.
2. Wrap wires together
3. Fold wires over
Splice
4. Stretch electrical tape tlghlly over splice.
Solder is the best way to connect wires, but it
takes skill and practice. Splice tile wires (as
shown above). Before taping, heat the wires
(not the solder). When the wires are warm
enough, touch the solder to the splice. The
solder will flow over the wires. Stretch electri-
cal tape tightly over splice.
Professional Tip
. Crimp Connections
Purchase crimp connectors and crimping
tool. Connectors are color coded. This
Jensen radio uses BLUE connectors (12-14
gage wire).
1. Strip 1/4 inch (6mm) 01 insulation Irom
both wires.
2. Insert into connector.
3. Crimp tighlly.
You can makepermainerlt splices (using
butt
or select connectors that
0§
Stripwil'e ~
114' (Bmm)
ti l
5
Advertisement
Table of Contents
