Controlling The Picture And Sound; Switching Between Picture Sources - Epson PowerLite 830p User Manual

note
You can use the projector's
menus to fine-tune the
picture and sound quality as
described on page 59.
Source buttons
Using the Remote Control
34

Controlling the Picture and Sound

You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, display a picture-in-picture image, and adjust
the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
The easiest way to select your source is to press the
button on the remote control or projector repeatedly
Search
until you see the image you want on the screen.
On the projector's control panel, there are three
Press the
Source Search
image signals from connected devices, press the
Computer/Component
connected to the
Computer/Component
button to switch between equipment connected
Video/S-Video
to the and
Video S-Video
On the remote control, there are four
to switch between equipment connected to the port identified on
each button.
After you select a source, the screen goes dark for a moment before the
image appears.
button to automatically search for any
button to switch between equipment
ports, or press the
ports.
buttons. Use them
Source
Source
buttons:
Source