PSC Falcon 310 User Manual page 25

User's Guide
Figure 5. Back View of Falcon Model 33x
Upper Hand -Strap Holder
Hand Strap
NiMH Battery Pack
5. Lay the plastic ribbon along the bottom of the battery compartment
with the end sticking out.
6. Find the positive (+) and negative (-) symbols on the
label.
Pack's
7. With the label side out, tilt the positive end of the pack into the
upper end of the battery compartment.
8. Firmly press the negative end until it is fully inserted into the bat-
tery compartment.
9. Place the plastic ribbon underneath the battery-compartment cover.
10. Replace the battery-compartment cover by inserting the bottom tab
into the slot and rotating the cover latch in a clockwise direction.
11. Replace the hand-strap hook on the connector at the base of the
unit.
Lower Hand Strap connections
Batteries
Dial
Battery
compartment
cover
Plastic Ribbon
IR Port
NiMH Battery
15