PSC Falcon 310 User Manual page 23

User's Guide
Falcon Models 31x and 32x
To replace the batteries for Falcon models
lowing steps:
1. Turn the Falcon off.
Figure 4. Back View of Falcon Models 31x and 32x
Strap-hook holders
Serial Port
2. Detach the elastic hand-strap on the back of the Falcon by pulling
its hook out of the holder near the base.
3. Firmly press the tab on the battery-compartment cover up until the
cover is released from the body of the unit.
• A symbol on the body indicates the direction in which to press
the tab.
4. Pull the end of the exposed plastic ribbon in the battery compart-
ment until the batteries pop out.
5. Lay the plastic ribbon along the bottom of the battery compartment
with the end sticking out.
and , complete the fol-
31X 32X
Battery-compartment cover
Tab
Battery Pack
-
PSC
00-862-00
NiCD BATTERY
E9642W
NiCD Battery
Pack Label
Batteries
13