PSC Falcon 310 User Manual page 24

Falcon Basics
14
6. Find the
positive (+)
NiMH Battery Pack's
• For
Alkaline Batteries
diagram inside the compartment. Skip steps 7– 8.
7. With the label side out, tilt the
upper end of the battery compartment.
8. Firmly press the
tery compartment.
9. Place the plastic ribbon underneath the battery-compartment cover.
10. Replace the battery-compartment cover by sliding it into place.
11. Replace the hand-strap hook in its holder.
The Falcon 32X will not function unless the battery-compartment cover is in
place and securely latched.
Falcon models 33x
To replace the batteries for Falcon models
steps:
1. Turn the Falcon off.
2. Detach the elastic hand strap on the back of the Falcon by releasing
its hook from the hand-strap connector at the base of the unit.
3. Turn the dial counter-clockwise to release the battery compartment
cover.
4. Pull the end of the exposed plastic ribbon in the battery compart-
ment until the batteries pop out.
and
negative (-)
label.
, insert in the positions indicated by the
positive
end until it is fully inserted into the bat-
negative
33X
Falcon
symbols on the
NiCD or
end of the pack into the
, complete the following
®
DOS Portable Terminals