Sony MZ-R50 Operating Instructions Manual page 50

zMD playing
Playing an MD right away!
See the illustrations in the Japanese text
(pages 12 to 13).
If you want to use the rechargeable battery,
be sure to recharge them before playing
(see page 30).
1 Make connections.
1 Connect the remote control-
equipped headphones
(supplied) to the 2/REMOTE jack.
2 Connect the DC IN 6V jack of the
recorder to a wall outlet with the
supplied AC power adaptor.
Insert an MD.
2
1 Slide the OPEN switch and
open the lid.
2 Insert an MD with the label side
facing up, and press the lid down
to close.
3 Start playing.
1 Press( (Turn the control to
(•+ on the remote control).
A short beep sounds in the
headphones.
2 Press the VOLUME +/–
buttons to adjust the volume.
To stop play, press p.
To Do this (Beeps in the
headphones)
Pause Press P. (Continuous
short beeps)
Press P again to
resume play.
Press = once.
Find the
beginning of the Turn the control to
= on the remote
current track
control. (Three short
beeps)
Find the Press + once.
beginning of the Turn the control to
(•+ on the
next track
remote control. (Two
short beeps)
Keep pressing =.
Go backwards
while playing 1) Keep the control
turned to = on the
remote control.
Go forward Keep pressing +.
1)
while playing Keep the control
turned to (•+
on the remote
control.
p, then slide the
Remove the MD
OPEN switch and
open the lid.
1) To go backwards or forward quickly without
listening, pressP and hold down = or
+ (keep the control turned on the remote
control).
2) Once you open the lid, the point to start play
will change to the beginning of the first
track.
If the playback does not start
Make sure the recorder is not locked. If it
is locked, slide the HOLD switch in the
opposite direction of the arrow.
When using optional headphones
Use headphones with a stereo mini-plug.
You cannot use headphones with a micro-
plug.
2)
51