Logging Out; Exiting The Xstack Storage Management Center - D-Link DSN-1100 X Stack User Manual

3. Click the User Accounts button on the left side of the Settings tab:
The Settings tab displays your user account settings (an example is shown in Figure 2-11
on page 21).
4. In the left column, click the user account you want to delete.
5. Click the Remove button.
The user account is deleted from the left column.
6. To delete more user accounts, repeat steps 4 and 5.

2.4 Logging Out

When you finish working with the current xStack Storage system, you can log out using any of
the following methods:
Click Log Out on the File menu.

Click Log Out in the System Actions panel.

Right-click the IP address of the xStack Storage in the View panel and click Log Out from

the shortcut menu.
Performing any of these steps displays the login screen and keeps the xStack Storage
Management Center running. You can then log in to the same or another array in the View
panel by starting with step 3 in section 2.1 on page 10, or perform any of the actions in the
System Actions panel.

2.5 Exiting the xStack Storage Management Center

To end your current management session, use the following procedure to exit from the xStack
Storage Management Center. If you want to power off the xStack Storage system, use the
procedure in section 2.6 after performing the following procedure.
1. On the File menu, click Exit.
The xStack Storage Management Center closes.
xStack Storage Management Center Software User's Guide
No warning message appears prior to exiting the xStack Storage Management
Center. Therefore, be sure you want to exit before clicking Exit on the File
menu
25