Ungrouping Ports - D-Link DSN-1100 X Stack User Manual

This "V" Indicates
That the IP
Address Selected
in the Main
Display is VLAN
Enabled
Figure 6-10. Example of an IP Address that Belongs to a VLAN-Enabled Group

6.5.2 Ungrouping Ports

If you want to ungroup the ports in a LAG:
1. In the Network Settings View of the Main Display, click a LAG.
2. Perform one of the following steps:
On the Network menu, click Ungroup Ports.
–
In the Network Actions panel, click Ungroup Ports.
–
Press the right mouse button and click Ungroup Ports from the shortcut menu.
–
Any of these steps ungroups the ports in the selected group.
3. Record your settings in Table C-3.
xStack Storage Management Center Software User's Guide 97