Clock Adjustment; Block Diagram - Clarion VRX925VD Service Manual

CLOCK ADJUSTMENT

1. When the panel is open,press the [ADJ] button to select
the ADJUST MOD menu.
2. Touch the [down] key to select "CLOCK".Touch the
[CLOCK] key to adjust the time.
3. Touch the [up],[down],[a.m] or [p.m] key to adjust the
time.
*The time is displayed in 12-hour format.
4. Press the [ADJ] button again or touch the [RTN] key two
times.The unit returns to the previous mode.

BLOCK DIAGRAM

DVD mechanism section
VRX925VD
CHANGING THE RECEPTION AREA
This unit is initially set to USA(set to outside USA) frequency
intervals of 10kHz(9kHz) for AM and 200kHz(50kHz) for FM.
When using it outside the USA(in the USA),the frequency
reception range can be switched to the intervals below.
NOTE:( )ASIA/OCEANIA
SETTING THE RECEPTION AREA
While pressing [DISP] button, each time you press and hold
the number "6" of the [DIRECT] buttons for 2 seconds or
longer, the reception area switches from inside the USA to
outside the USA or from outside the USA to inside the USA.
* Any station preset memories are lost when the recep-
tion area is changed.
- 4 -