Sharp TU-GD10U-T Service Manual page 24

TU-GD10U-T
TU-45GAD/T
LC-45GX6U/D/T
15.Remove the four lock screws r and detach the Fans.
16.Remove the four lock screws t and detach the DC/DC PWB.
17.Remove the three lock screws y and detach the MOTOR CONTROL PWB.
18.Remove the six lock screws u and the 2 lock screws i, and detach the POWER SUPPLY PWB.
19.Remove the five lock screws o and detach the INVERTER 1 PWB.
20.Remove the five lock screws p and detach the INVERTER 2 PWB.
21.Remove the five lock screws a and detach the INVERTER 3 PWB.
22.Remove the five lock screws s and detach the INVERTER 4 PWB.
23.Remove the two lock screws d and detach the R/C LED PWB.
24.Remove the eight lock screws f and detach the Fixing Metals.
25.Remove the six lock screws g and detach the Bracket Angles.
26.Remove the six lock screws h and detach the LCD Panel.
INVERTER 1 PWB
INVERTER 2 PWB
RC/LED PWB
DC/DC PWB
15
14
Fan
19
20
POWER SUPPLY PWB
18
17
26
24
Fixing Metal
23
Bracket Angle
25
14
Fan
16
MOTOR CONTROL PWB
Bracket Angle
25
24
21
INVERTER 3 PWB
INVERTER 4 PWB
22
24
Fixing Metal