Download Print this page

Sharp TU-GD10U-T Service Manual page 19

Hide thumbs Also See for TU-GD10U-T:

Table of Contents

5. Remove the twenty one lock screws, four washers and six hexagon shaft screws from the Rear Panel, and

detach the Rear Panel.

6. Remove the DVI / HDMI PWB.

6-1. Remove the four lock screws from the DVI / HDMI PWB Angle.

6-2. Remove the four lock screws from the DVI / HDMI PWB.

7. Remove the DC/DC Converter PWB, TMDS-TX PWB and AUDIO I/F PWB.

7-1. Remove the three lock screws from the TMDS PWB Angle.

7-2. Remove the four lock screws from the DC/DC Converter PWB.

7-3. Remove the four lock screws from the TMDS-TX PWB.

7-4. Remove the two lock screws from the AUDIO I/F PWB.

LC-45GX6U/D/T

TMDS PWB Angle

AUDIO I/F PWB

Show Quick Links

Table of Contents

Troubleshooting