Tc/Chr Convert Menu - Panasonic AJ-HD3700H Operating Instructions Manual

TC/CHR CONVERT menu

This menu is displayed by pressing the following keys:
Key Key designation
F1 TC SYNC° 1
For selecting the point at
which the TC value is to
be set.
F2–F5 ——
2
F6 DF MD°
F7 ——
F8 EXIT
F9–F10 ——
F11 SD SUPER°
F12 HD SUPER°
F13 LTC OUT° 2
1 This can be set only when the 1080/23p or 1080/24p system format is set and when F11, F12 or F13 key has been
°
set to CONVERT.
2 These keys are displayed only when the 1080/23p or 1080/24p system format has been selected.
°
F1 F2
For selecting the point at which the TC value is to be set when
the time code is converted.
When this key is pressed, the window is opened, and the TC
value can be input.
For selecting drop frame or non-drop frame of the time code
signals, which are to be TC converted and output, for the 3:2
pull-down output from 1080/23p or 1080/24p.
DF:
NDF: Non-drop frame is set.
Returns the VTR to the TC/CHR menu screen.
2 CONVERT: Counts up at 30 frames.
ORIGINAL: Counts up at 24 frames.
2 CONVERT: Counts up at 30 frames.
ORIGINAL: Counts up at 24 frames.
CONVERT: Counts up at 30 frames.
ORIGINAL: Counts up at 24 frames.
)
TC/CHR F9
F3 F4 F5
Description
Drop frame is set.
– 80 –
F6 F7 F8
F13
F12
F11
F10
F9