Disposal; Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti GX 90-WF Operating Instructions Manual

Fault
The fan is running, the tool does
not fire
The tool can not be pressed
against the work surface
Frequent transport malfunctions
with nails in plastic strips.

11 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information. If you wish to bring the tool to a materials separation facility yourself: Regional and international directives
and regulations must be observed.

12 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

13 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, until 19th April 2016: 2004/108/EC, as of
20th April 2016: 2014/30/EU, 2011/65/EU, 2006/66/EC,
EN ISO 12100, EN 792‑13.
Possible cause
The tool requires a cleaning service.
Less than 5 nails in the magazine
Nails jammed.
Damaged magazine strip.
Gas-driven fastening tool
GX 90-WF
01
2011
Remedy
Carry out a cleaning service.
See section: 9.3 Cleaning the tool 11
Add more nail strips.
See section: 5.1 Inserting nails 2 3
Remove the battery and the gas can.
WARNING
N.B.: Do not carry out any mainten-
ance work without fully unloading the
tool.
Remove the jammed nails.
Hold the nail pusher securely when it
is operated.
NOTE
Observe the gas can expiry date printed on the edge of
the can.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
02/2015
en
Lars Taenzer
Head of BU Direct Fastening
BU Direct Fastening
02/2015
21