In these operating instructions, "the tool" always refers to the GX 90-WF gas-driven fastening tool. Always keep these operating instructions to- gether with the tool. Tool parts, operating controls and indicators 1...
Make a note of Generation: 01 this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department. Serial no.: 2 Safety instructions d) Always unload the tool (remove the battery, gas 2.1 Basic information concerning safety...
Contact Hilti measures. Service after the battery has cooled down. 3 Description given by Hilti apply only when these conditions are ob- 3.1 Use of the product as directed served. The tool is for fastening wood to wood using specially The tool is for hand-held use only.
4 Technical data Right of technical changes reserved. Tool Weight (including battery) 3.7 kg (8.16 lbs) Dimensions (L x W x H) 384 mm x 134 mm x 381 mm Gas can GC 31, GC 32 Gas can type Operating temperature / ambient temperature with -5…+45°C (23 °F to 113 °F) GC 31 gas can Operating temperature / ambient temperature with...
NOTE The sound pressure and vibration values given in these instructions have been measured in accordance with a standardized test and may be used to compare one fastening tool with another. They may be used for a preliminary assessment of exposure. The data given represents the main applications of the fastening tool. However, if the fastening tool is used for different applications, with different accessories or is poorly maintained, the data may vary.
6 Guidelines 6.1 Fastening guidelines NOTE For detailed information, request the Hilti Fastening Tech- NOTE nology Manual from your regional Hilti office. Always observe the usage guidelines and instructions on the nail packaging. Observe any applicable national technical regulations.
7.3 Unintentional firing safety device NOTE Hold the tool securely. Avoid resilient materials. WARNING Do not use the tool if the sliding sleeve has been NOTE removed. Pull the trigger only after the tool has been fully pressed against the working surface. The tool is equipped with a safety device to prevent it from being triggered accidentally.
You can arrange for Hilti to carry out the required servicing Reload the fasteners and continue working with the work for you. To do so, contact your local Hilti Center or tool in the usual way. sales and service office.
Page 15
Remove the battery and the gas can. connected. lights green. Plug in the fan connector. The fan connector is fitted correctly Have the power tool repaired by Hilti but the fan still doesn’t start. Service. The fan is running, the tool does Empty gas can Insert a new gas can.
11 Disposal Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further information.