Technical Data - Hilti GX 90-WF Operating Instructions Manual

4 Technical data

Right of technical changes reserved.
Tool
Weight (including battery)
Dimensions (L x W x H)
Gas can
Gas can type 1
Operating temperature / ambient temperature with
GC 31 gas can
Operating temperature / ambient temperature with
GC 32 gas can
1 Contains: 1-butene, propene
Battery
Rated voltage
Capacity
Energy capacity
Weight
Maximum fastener driving rate
Work with interruptions:
Continuous operation:
Suitable fasteners
Nail length
Nail diameter
Magazine capacity
Magazine angle
Noise measurement conditions
Operation and set-up conditions: Set-up and operation of the fastening tool in accordance with E DIN EN 15895-
1 in the semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to
DIN EN ISO 3745. Test method: Enveloping surface method in anechoic room on reflective surface area in
accordance with E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
Caliber
Power regulation
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Sound power level, L
WA, 1S
Emission sound pressure level at the workplace,
L
2
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
1
3
pC, peak
3.7 kg (8.16 lbs)
384 mm x 134 mm x 381 mm
GC 31, GC 32
-5...+45°C (23 °F to 113 °F)
-10...+45°C (14°F to 113°F)
B 7/1.5 Li‑Ion
7.2 V
1.5 Ah
10.8 Wh
0.19 kg
up to 3 fastenings per second
1,200 fastenings per hour
50...90 mm
2.8...3.1 mm
75 (max.)
34°
Gas can 40 g
None
Fastening to squared timber 500 x 100 x 100 mm using
nail with smooth shank 75 x 2.8 mm
108 dB (A)
106 dB (A)
138 dB (C)
en
15