Yanmar 3JH5E Operation Manual page 83

12/05
1. To adjust, loosen the adjustment screw
(Figure 5, (4)) or cable fitting
(Figure 6, (3)) for the remote control
cable on the engine side and adjust.
2. Adjust the high-speed stop
(Figure 5, (5)) or (Figure 6, (6))
position first and then adjust the
low-speed stop (Figure 5, (3)) or
(Figure 6, (4)), with the adjustment
screw on the remote control lever
(Figure 5, (1)) or (Figure 6, (5)).
Adjusting Clutch Remote Control Cable
3JH5E / 4JH5E
Figure 7
4JH4-TE / 4JH4-HTE1 / 4JH4-HTE
(2)
(1)
Figure 8
JH Series Operation Manual
1. Ensure that the remote control lever
2. To adjust, loosen and retighten the
Adjusting Trolling Remote Control
Handle - If Equipped
(3)
(2)
(1)
X 1 - 2 6 1
(3)
0004563
Note: KMH4A marine gear shown.
PERIODIC MAINTENANCE
(Figure 7, (2)) or (Figure 8, (1)) moves
to the correct position when the remote
control handle is in the NEUTRAL,
FORWARD and REVERSE positions.
Use the NEUTRAL position as the
standard for adjustment.
cable fitting (Figure 7, (1)) or
(Figure 8, (2)).
(1)
(2)
(3)
(4)
Figure 9
1 – Cable Fitting
2 – Trolling Lever
3 – Low Speed (trolling)
4 – High Speed
5 – Loosen
6 – Tighten
7 – Normal Operation (high speed)
8 – Trolling (low speed)
(6)
(7)
(8)
(5)
0004498
75