Yanmar 3JH5E Operation Manual page 35

12/05
LCD control (hourmeter, coolant temperature, display brightness, oil
pressure, battery voltage)
Figure 1
Metric
1
Push and hold
(display will blink when
ready)
Metric
Return to hourmeter
You can switch (scroll) between displays by pressing
the buttons on the bottom.
Scroll
-1
English
2
Scroll
100, 80, 60, 40, 20, 0
(value will be set after
3 seconds)
English
JH Series Operation Manual
Press the power switch.
hourmeter.
Pressing the right button on the bottom of
Imperial units (°F) at the "System Units
screen" on the next page.
Pressing the right button again shows the
To set the brightness of the backlight:
1 Press the left button continuously and
2
In this condition, press the right button
3
to decrease the brightness and the left
button to increase the brightness.
(The brightness changes in 6 steps of 20 %.)
3 To set the desired brightness, do not
touch the buttons for 3 seconds.
button for approx. 2 seconds.
Next, press the right button to show the
pressure display.
Imperial units (PSI) at the "System Units
screen" on the next page.
Press again to show the battery voltage.
Pressing the button once more returns the
display to the initial hourmeter.
PRODUCT OVERVIEW
043718-00E00
27