Hitachi SF-140SV Operating & Installation Instructions Manual page 21

Cleaning
the softener
dispenser
Cleaning
the water
supply inlet
Care and
maintenance
of the washing
machine
Care and Maintenance
1. Pull the softener dispenser towards you and remove it.
2. Pull off the softener cap.
3. Use a brush or something to clean the parts.
4. Reverse the procedure to replace the softener dispenser.
■
Press the softener cap until it stops completely when you replace it. If
it is not pressed all the way in, the softener will not be added to the tub
completely and some will remain in the dispenser.
1.
1. Close the tap.
2. Disconnect the water supply hose from the top of the washing
machine.
3. Use a brush or something to clean the water supply inlet of the
washing machine.
4. Reverse the procedure to replace the water supply hose.
■
Clean the machine body.
Wipe the outside of the washing machine with a soft cloth. Do not use
solvents such as alcohol or benzine.
■
If you use a chemically treated cloth, use it according to the instructions
for the product.
■
If detergent or softener gets on the washing machine, quickly wipe it
off. The surface could be damaged.
2. 3.
21
3WPL085661-2