Hitachi SF-140SV Operating & Installation Instructions Manual page 17

Partial Operations Using the Fuzzy Program
If you want...
Operations
1.
2.
3.
■
Set the
4.
operations
5.
Drains water and spins
before rinsing. Stops
Remarks
while the rinse water is
still in the tub.
To only rinse
Rinse only
Setting method
Set the amount of water.
If the amount of water is not set, then 103 L is
used.
Set the number and
type of rinses with the
Rinse button.
Press the Start/Pause button to start.
To rinse and spin
Rinse ⇒ Spin
Turn on the power.
Select the Fuzzy program.
■
Set the number and
type of rinses with the
Rinse button.
■
Set the spin time with
the Spin button.
■
Set the spin speed
with the Spin Control
button.
Drains water and spins
before rinsing.
To drain and spin
Drain ⇒ Spin
Cannot be used.
■
Set the spin time with
the Spin button.
■
Set the spin speed
with the Spin Control
button
Drains water and spins.
17
3WPL085661-2