Hitachi SF-140SV Operating & Installation Instructions Manual page 10

How to Use the Washing Machine
5
Put detergent into the detergent dispenser and close the lid
■
Open the detergent dispenser, add the amount of detergent shown on the display, and
then close the detergent dispenser.
■
The amount of detergent is based on a single 35-gram scoop of powder detergent.
Since the required amount of detergent varies depending on the type of detergent,
follow the instructions on the package of detergent.
■
For liquid detergent, follow the instructions on the package and add it to the liquid
detergent/liquid bleach dispenser.
■
Add softener to the softener dispenser according to the instructions on the package of
softener. It is added to the tub immediately before the fi nal rinse.
■
For liquid bleach, follow the instructions on the package and add it to the liquid
detergent/liquid bleach dispenser.
– Pausing a program:
– Adding clothes partway
through operation:
– Terminating a
program:
6
Program ends
■
The buzzer sounds when a program ends.
The buzzer can be deactivated or the sound changed.
– Deactivate the buzzer:
– Activate the buzzer:
– Change the sound of
the buzzer:
■
The washing machine automatically switches off when the operations are fi nished.
10
3WPL085661-2
Press the Start/Pause button. The washing machine will
switch itself off if it is not restarted within 1 hour.
Press the Start/Pause button to pause operation and
add your clothes. The lid is locked while the tub is
spinning, so wait until the tub stops completely and
the lid lock is automatically released. After adding the
clothes, close the lid and press the Start/Pause button
to restart operation.
* Note: It is not recommended to add a large amount
of clothes as the washing machine fi rst measures the
load size to determine optimum operation.
Press the Start/Pause button, and press the Power
button to turn off the power.
Press the Power button to turn on the power.
Press and hold the Start/Pause button for at least
3 seconds.
Press the Power button to turn on the power.
Press and hold the Start/Pause button for at least
3 seconds.
Press the Power button to turn on the power.
Press and hold the Water Level button for at least
3 seconds.