Table of Contents
Advertisement
AM/FM interval (span)
The International Telecommunication Union (ITU) has
established that member countries should maintain either a
10 kHz or a 9 kHz interval between broadcasting frequen-
cies of any AM station. The illustration shows the 9 kHz
interval zones (regions 1 and 3), and the 10 kHz interval
zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on
the rear panel) to AM tuning interval (span) of your area.
To change the tuning zone:
1
Press the ON/STAND-BY button to enter the stand-
by mode.
2
Set the SPAN SELECTOR switch to "50/9" for 9 kHz
AM interval (50 kHz FM interval), and "100/10" for 10
kHz AM interval (100 kHz FM interval).
3
Whilst pressing down the
DEMO button, hold down the ON/STAND-BY button
for at least 1 second.
"CLEAR AL" will appear.
Caution:
The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.
OPERATION MANUAL
button and the X-BASS/
CD-BP2000W/210W/2000A/BK2000W/210W
Connecting the AC power lead
Check the setting of the AC voltage selector located on the
rear panel before plugging the unit into an AC socket. If nec-
essary, adjust the selector to correspond to the AC power
voltage used in your area.
Selector adjustment:
Turn the selector with a screwdriver until the appropriate
voltage number appears in the window (110 V, 127 V, 220 V
or 230 V - 240 V AC).
Notes:
Plug the AC power lead into an AC socket, after any con-
nections.
Unplug the AC power lead from the AC socket if the unit
will not be in use for a prolonged period of time.
AC Plug Adaptor
In areas (or countries) where an AC socket as shown in
illustration
is used, connect the unit using the AC plug
adaptor supplied with the unit, as illustrated. The AC plug
adaptor is not included in areas where the AC wall socket
and AC power plug can be directly connected (see illustra-
tion
).
– 7 –
1
2
To an AC socket
Hide quick links:
Advertisement
Table of Contents
