Table of Contents
Advertisement
Appendix D
Troubleshooting
I cannot find
the AT&T DECT
6.0 on my cell
phone.
I don't know
how to search
for or add new
devices on my
cell phone.
My cell phone
disconnects
from the
telephone base.
• When you are on a CELLULAR call using the handset,
your cell phone is in use. Attempting to use the cell
phone for any other purpose may disconnect your call.
You may need to connect the cellular phone to the
telephone base manually to resume the connection,
refer to page 18 for details.
• Make sure that the Bluetooth feature is turned on in the
telephone base. Carefully follow the setup instructions
on page 18.
• Make sure that you manually set your cell phone to find
or search for devices.
• Turn off your cell phone, then turn it on again.
• Reset the telephone base. Unplug the electrical power.
Wait for approximately 15 seconds, then plug it back in.
Repeat the above suggestions.
• Most cell phones have the Bluetooth feature in the
connection or setup menus. Please refer to your cell
phone user's manual.
• In general, press the menu key on your cell phone,
then look for the Bluetooth menu in the settings or
connection menu. In the Bluetooth menu, select the
option to search for or add new devices.
• Turn off your cell phone, then turn it on again.
• Make sure that you are not using your cell phone when
on a CELLULAR call.
• When you are on a CELLULAR call using the handset,
your cell phone is in use. Attempting to use the cell
phone for any other purpose may disconnect your call.
You may need to connect the cellular phone to the
telephone base manually to resume the connection,
refer to page 18 for details.
63
Advertisement
Table of Contents
