Cascade Mode - Konica Minolta 2230 User Manual

Output Modes

Cascade Mode

Use the Cascade mode to allow continuous delivery of non-sort copies from the top bin to
subsequent bins of the sorter. Select the cascade mode when the print quantity amount exceeds the
100-sheet capacity of the top bin.
The Cascade mode allows you to increase the overall bin capacity up to 670/700 sheets, by using
the top bin plus some or all of the 19/20 regular bins. Copied sheets exceeding this capacity will be
delivered to the 20th bin (the bottom bin). (See Caution statement.)
NOTE: The Cascade mode can be activated by service during setup.
Copy paper:
Overall bin capacity:
ST-216 Off-Line Stapler Sorter:
ST-217 In-Bin Stapler Sorter:
Print quantity:
Incompatible:
1 Place originals, as required.
2 Press [SORT]/[GROUP]/[STAPLE] to turn off each indicator light.
3 Enter desired print quantity, then press [START PRINT].
Press [AUTO RESET] to clear settings.
NOTES
1 In Cascade mode, interrupt copying can be used, however, the cascade function cannot be used in Interrupt mode.
2 For details on paper weights, sizes, and capacities when using the sort mode, please see Section 4.
CAUTION: TOTAL BIN CAPACITY IN CASCADE MODE
Should you set the print quantity above the max. 670/700-sheet capacity, be sure to remove the
copies delivered to the 20th bin before the maximum capacity is reached; otherwise, a paper
misfeed may occur.
6-6 Output Modes
11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
100 sheets in Top bin + (19 bins x 30 sheets) = 670 sheets
100 sheets in Top bin + (20 bins x 30 sheets) = 700 sheets
Max. 999 sheets (See Caution statement.) (Sheets over 670/700 require removal from
bottom bin)
Sort, Group, Interrupt