Advertisement
Setup Menu
16:9 (Wide Screen): This is selected when the unit is connected to a wide-screen TV.
The default setting is 4:3 LB.
NOTE: Certain DVD discs are formatted in wide screen (16:9) or letter box (4:3) only.
Adjusting the setting of the disc player will not change the screen size for these
"Format-only" discs.
2. Screen Saver
Press the UP/DOWN button to shift between Screen Saver ON and OFF. And press ENTER
to confirm.
The default setting is Off.
The screen saver is useful to prevent your display from becoming damaged. If the Screen
Saver is set ON, the screen saver picture appears when you leave the DVD player in stop
mode for about a few minutes.
Automatic power off function
After the screen saver has been engaged for about a few minutes, the DVD player will auto-
matically turn itself off, except during CD playback.
3. TV System
Press the UP/DOWN button to select the TV system from NTSC/PAL/AUTO. And press
ENTER to confirm.
The default setting is NTSC.
(The TV system for North America is NTSC. Auto should only be used if you have a Multi-
System TV.)
4. Brightness
Press the UP/DOWN button to select your satisfied brightness effect from
Normal/Bright/Soft. And press ENTER to confirm.
The default setting is Normal.
5. Contrast
Press the UP/DOWN button to select your satisfied contrast ratio from –4, -3, -2, -1, 0, 1, 2,
3 and 4. And press ENTER to confirm.
The default setting is 0.
—Audio Setup—
SPDIF/RAW:
When this item is selected, all digital coaxial and optical outputs are turned on
and are able to output a Dolby Digital signal.
NOTE: In order to output a Dolby Digital signal, the amplifier or external device that the unit
is hooked up to must have Dolby Digital, DTS and MPEG decoding.
SPDIF/PCM:
Select this item when the DVD player is connected with a 2-channel digital
stereo amplifier. When a Dolby Digital or MPEG disc is played, the digital port
will output in PCM 2-channel format.
a. When the Digit Out is highlighted, press ENTER or
LEFT to confirm.
b. Press UP/DOWN to select Digit Out from
SPDIF/PCM. SPDIF/RAW, and OFF. And press
ENTER to confirm.
The default setting is SPDIF/RAW.
NOTE: When Digital Out is NOT in use, it is recom-
mended to turn OFF the digital output setting, for the
purpose of minimizing the circuit interference.
15
Setup Menu
OFF:
When this item is selected, all digital coaxial and optical outputs are turned off.
—Custom Setup—
Press the UP/DOWN button to highlight the desired Custom item (Parental Ctrl, Password,
Angle Mark, Default), and press ENTER to confirm.
A). Parental Control
There are eight levels of Parental Control. Level one opens discs to people of all
ages. Level eight is suitable only for adults.
To change the parental control setting, a 4-digit code is required to be input first. (The
default code is 8888.) When the input code is confirmed, the level setting menu will
appear. Select the appropriate level by the UP/DOWN button, and press ENTER to
confirm.
B). Password
Move the cursor to the PASSWORD prompt and press ENTER. Input the password
8888 if it is the first use. After confirmation, you will be required to input a new 4-digit
code, and verify again.
WARNING:
Please keep a copy of the new password in a safe place. Otherwise, you will not be
able to change the Parental Control.
Please remember your password, as the DEFAULT setting will revert everything BUT
the PASSWORD to the factory defaults.
C). Angle Mark
Choose between ON and OFF.
The default setting is ON.
When the Angle Mark function is ON, an icon will be displayed on screen if the disc has
multiple angle shots available for viewing.
Press ANGLE on the remote control to enjoy these scenes.
D). Default
This function allows you to change the player back to the factory default settings. All set-
tings will be changed back to the original settings except the Password.
16
Advertisement
