Common Functions & Information - Sharp TM150 User Manual

Common Functions &
Information
This section describes useful common functions you can
use for both camera and video.
Using the Digital Zoom Function
1
At the main menu, select in the following order:
"Camera" → "Create picture" or "Create video."
2
Press c to zoom out (the subject becomes
smaller) or press d to zoom in (the subject
becomes larger.)
The zooming ratio indicators appear automatically
c d
when or is pressed and disappear when the
key is released.
The available zooming steps depend on the camera
settings.
In "Create picture" mode:
When the picture size is set to "Small": steps 1 to
10
When the picture size is set to "Medium": steps 1
to 5
In "Create video" mode: steps 1 to 10
The digital zoom function is not available when
picture size is set to "Megapixel" or "Large" in
"Create picture" mode.
7-46
Taking Close-up Pictures
When the distance to the subject is approximately
2 inches (5 cm), set the macro switch to the macro
S
position ( ). When the distance to the subject is
approximately 16 inches (41 cm) or more, set the macro
switch to the normal position (
1
At the main menu, select in the following order:
"Camera" → "Create picture" or "Create video."
2
Set the macro switch to the macro position (S).
3
Press B or the side-down key (W) to take a
picture or to record video.
To cancel macro mode
Set the macro switch to the normal position (
Using the Delay Timer
1
At the main menu, select in the following order:
"Camera" → "Create picture" or "Create video."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Delay timer" and
press B.
4
Press a or b to highlight "On" and press B.
" " appears and returns to "Create picture/video"
mode.
U
).
U
).