Table of Contents
Advertisement
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by
the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this
equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This
identifier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must
comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. An RJ jack should normally be used for connecting to a single line
and an RJ jack for two lines. See the installation instructions in the user's manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your
telephone line and still have them ring when you are called. The REN for this product is encoded as the
6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most,
but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact
your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment
connected to your telephone line, ensure the connection of this equipment does not disable your alarm
equipment. If you have questions about what will disable alarm equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been
corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized
agents. For repair procedures, follow the instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may
temporarily discontinue your telephone service. The telephone service provider is required to notify you
before interrupting service. If advance notice is not practical, you will be notified as soon as possible.
You will be given the opportunity to correct the problem and the telephone service provider is required
to inform you of your right to file a complaint with the FCC. Your telephone service provider may make
changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this
product. The telephone service provider is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers
(e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: () this device may not cause harmful interference,
and () this device must accept any interference received, including interference that may cause
undesired operation.
Privacy of communications may not be ensured when using this telephone.
The term ''IC:'' before the certification/registration number only signifies that the Industry Canada technical
specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is .0. The REN is an indication of the
maximum number of devices allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the
RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
California Energy Commission battery charging testing instructions
This telephone is set up to comply with the energy-conserving standards right out of the box. These
instructions are intended for California Energy Commission (CEC) compliance testing only. When the
CEC battery charging testing mode is activated, all telephone functions, except battery charging, will
be disabled.
To activate the CEC battery charging testing mode:
.
Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged
with charged batteries before proceeding.
.
While you press and hold /FIND HANDSET, plug the telephone base power adapter back to the
power outlet.
3.
After about 0 seconds, when the
again within seconds.
When the phone successfully enters the CEC battery charging testing mode, all lights on the
telephone base turn off. All handsets alternately show To register HS... and ...see manual.
When the phone fails to enter this mode, repeat Step through Step 3 above.
Note: The telephone base will be powered up as normal if you fail to press /FIND HANDSET within
seconds in Step 3.
To deactivate the CEC battery charging testing mode:
.
Unplug the telephone base power adapter from the power outlet, then plug it back in. The telephone
base is powered up as normal.
.
Register your handsets back to the telephone base. See page 3 for handset registration instructions.
For C-UL compliance only
Mesures de sécurité importantes
Afin de réduire les risques d'incendie, de blessures corporelles ou d'électrocution, suivez toujours ces
mesures préventives de base lorsque vous utilisez votre téléphone :
.
Lisez et comprenez bien toutes les instructions.
.
Observez toutes les instructions et mises en garde inscrites sur l'appareil.
3.
Débranchez ce téléphone de la prise murale avant de le nettoyer. N'utilisez pas de nettoyeurs liquides
ni en aérosol. N'utilisez qu'un chiffon doux et légèrement humecté.
.
N'utilisez pas ce produit près de l'eau, tel que près d'un bain, d'un lavabo, d'un évier de cuisine, d'un
bac de lavage ou d'une piscine, ou dans un sous-sol humide ou sous la douche.
5.
Ne déposez pas ce téléphone sur un chariot, support ou table chancelants. L'appareil pourrait tomber
et être sérieusement endommagé.
6.
Évitez d'installer le système téléphonique dans les endroits soumis à une température extrême, à la
lumière directe du soleil ou à proximité immédiate d'autres appareils électriques ou électroniques.
Protégez votre téléphone contre les sources d'humidité, la poussière, les vapeurs et les liquides
corrosifs.
7.
Le boîtier de l'appareil est doté de fentes et d'ouvertures d'aération situées à l'arrière ou en dessous.
Afin d'empêcher la surchauffe, ces ouvertures ne doivent pas être obstruées en plaçant l'appareil sur
un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil à proximité d'un élément de
chauffage ni d'une plinthe électrique. De plus, ne l'installez pas dans une unité murale ou un cabinet
fermé qui ne possède pas d'aération adéquate.
8.
Ne faites fonctionner cet appareil qu'avec le type d'alimentation indiqué sur les étiquettes de l'appareil.
Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur
d'électricité.
9.
Ne déposez rien sur le cordon d'alimentation. Installez cet appareil dans un endroit sécuritaire, là où
personne ne pourra trébucher sur la ligne d'alimentation ni le cordon téléphonique modulaire.
0.
N'insérez jamais d'objets à travers les fentes et ouvertures de cet appareil, car ils pourraient toucher
à des points de tension dangereux ou court-circuiter des pièces, ce qui constituerait un risque
d'incendie ou d'électrocution. N'échappez pas de liquides dans l'appareil.
light starts flashing, release /FIND HANDSET and then press it
7
Advertisement
Table of Contents
