Ember Placement; Rock Wool Placement - Travis Industries 864 Owner's Manual

Ember Placement

A bag of embers is provided to further enhance the firebox. Place the embers on the firebox floor and on
the outer burner (especially over exposed rivets on the burner). Do not place embers over any of the
burner holes or air channels. See the picture below.
NOTE: When placing the embers, place one ember on both sides of the accent light deflectors (see
illustration below). This helps block light from exiting the slot on the deflector and creating a line of light.

Rock Wool Placement

The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the rock
wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and forefinger.
Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the entire bag of
rockwool. Use only a small amount and save the remainder. Over-use of rockwool will diminish the glow
and may cause sooting or other adverse conditions.
© Travis Industries
Maintenance
4141208
27
100-01405