Setting The Sensor Position; Setting The Black Mark Sensor Position - Toshiba DB-EA4D SERIES Owner's Manual

5. PRINTER SETUP

5.3 SETTING THE SENSOR POSITION

Be careful when handling the print head as it becomes very hot.
Soyez prudent lorsque vous manipulez la tête d'impression puisqu'elle devient chaude.
Label Gap Sensor
Black Mark Sensor
Thermal Head

5.3.1 SETTING THE BLACK MARK SENSOR POSITION

Black mark sensor position to be adjusted while using Black Mark paper by following procedure:
 Open the top cover and fold over the end of the tag paper.
 Rotate sensor knob to move black mark sensor horizontally until the black mark sensor is aligned
at the center of black mark on tag paper.
 Black mark sensor is movable within the area of 6.0 – 66.5mm from the left of tag paper.
Min. 2.0 mm
Min. 12 mm
AVERTISSEMENT!
Sensor Knob
Sensor position
(Center of black mark)
WARNING!
E5-5
5.3 Setting The Sensor Position
Black Mark
Black Mark
Sensor Position
ENGLISH VERSION