Yamaha PSR-S750 Reference Manual page 79

[1 ]– CURSOR
[4 ]
[5 ] REPLACE
[6 ] INSERT
[7 ] DELETE
[8 ] CLEAR
6
Use the [E] (SEQUENCE END) button to determine how Registration Sequence
behaves when reaching the end of the sequence.
• STOP Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is
"stopped."
• TOP The sequence starts again at the beginning.
• NEXT BANK The sequence automatically moves to the beginning of the next Registration Memory Bank
in the same folder.
7
Press the [F] (REGISTRATION SEQUENCE ENABLE) button to turn the Registration
Sequence function on.
8
Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence
program temporarily.
9
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK display, then press the [6
Registration Bank.
This operation is necessary because the Registration Sequence program can be saved to a Registration
Bank.
NOTICE
For future recall, make sure to execute the Save operation. Failing to do so results in the loss of the Registration Sequence program.
Moves the cursor.
Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
Inserts the number of the currently selected Registration Memory number to the
cursor position.
Deletes the number at the cursor position.
Deletes all numbers in the sequence.
] (Save) button to save the current
PSR-S950/S750 Reference Manual
7
79