Yamaha PSR-S750 Reference Manual page 60

[7
[8
4
While holding the SONG [REC] button, press the desired track button.
5
Press the SONG [F/ K] (PLAY/PAUSE) button to start Punch In/Out recording.
3
According to the settings in Step 3, play the keyboard between the Punch In and Punch Out points. Refer
to the examples of various settings illustrated below.
6
Press the [I] (SAVE) button to execute the Save operation.
NOTICE
The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-
tion.
Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function. The illustrations below
indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
REC START setting
REC END setting
NORMAL
REPLACE ALL
NORMAL
PUNCH OUT
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
60
PSR-S950/S750 Reference Manual
]/ PEDAL PUNCH When this is set to ON, you can use Foot Pedal 2 to control the Punch In
] IN/OUT and Punch Out points. While a Song is playing back, pressing (and hold-
ing) Foot Pedal 2 instantly enables Punch In recording, while releasing the
pedal stops recording (Punch Out). You can press and release Foot Pedal 2
as often as you want during playback to punch in/out of overwrite record-
ing. Note that the current function assignment of the Foot Pedal 2 is can-
celled when the Pedal Punch In/Out function is set to ON.
NOTE
Original data
1 2
Start overwrite recording *1
1 2
Start overwrite recording *1
1 2
Start overwrite recording *1
1 2
Play back Play the keyboard to start
original data overwrite recording
1 2
Play back Play the keyboard to start
original data overwrite recording
1 2
Play back
Play the keyboard to start
original data overwrite recording
1 2
Play back
Start overwrite recording
original data
1 2
Play back
original data Start overwrite recording
1 2
Play back
Start overwrite recording
original data
1 2
Pedal Punch In/Out operation may be reversed depending on the particular pedal you've connected
to the instrument. If necessary, change the pedal polarity to reverse the control
3 4 5 6
Stop recording *2
3 4 5
Deleted
Stop recording *2
3 4 5 6
Stop overwrite recording/play original data
3 4 5 6
Stop recording *2
3 4 5
Deleted
Stop recording *2
3 4 5 6
Stop overwrite recording/play original data
3 4 5 6
Stop recording *2
3 4 5 Deleted
Stop recording *2
3 4 5 6
Stop overwrite recording/play original data
3 4 5 6
(page
*1 If you want to re-record from the 3rd
7 8
measure in this setting, move the
Song position to the 3rd measure
then start Recording to avoid over-
writing measures 1–2.
*2 To stop recording, press the [REC]
button at the end of measure 5.
7 8
7 8
7 8
7 8
7 8
7 8
Previously recorded data
Newly recorded data
Deleted data
102).