Right Trim - HP proone 400 g2 Maintenance & Service Manual

Right trim

To remove the right trim:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the optical drive (see
6. Remove the top trim (see
60 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
Replacing the optical drive on page
Top trim on page 34).
23).
24).
28).
31).
22).