ViewSonic PJD6531w Service Manual page 8

C. Connection ports
1. LAN
For network control.
2. USB
This connector is for firmware update and mouse function support.
3. VIDEO
Connect composite video output from video equipment to this jack.
4. S-VIDEO
Connect S-Video output from video equipment to this jack.
5. MONITOR OUT
Connect to a computer display, etc.
6. AUDIO OUT
Connect to a speaker or other audio input equipment.
7. COMPUTER IN 1
Connect image input signal (analog RGB or component) to this jack.
8. RS-232
When operating t he projector via a computer, connect this to the controlling computer 's
RS-232 port.
9. COMPUTER IN 2
Connect image input signal (analog RGB or component) to this jack.
10. 12V OUT
12V DC out
11. AUDIO IN
Connect an audi o output from video equipment to this jack. The upper AUDIO IN is
Audio 1, and the lower one is Audio 2. When Audio 1 is turned on, Audio 2 will turn off
automatically and vice versa.
ViewSonic Corporation
7
Confidential - Do Not Copy
PJD6531w