6.
Under the [DLP Composer Lite] screen, select [Flash Loader]. The Flash Loader screen appears.
7.
Click
and select the firmware
[Browse]
8.
Make sure [Skip Boot Loader Area] is checked, and its value is [32KB].
9.
Press and hold the Enter and Power buttons simultaneously on the projector keypad and then plug in
the power cord on the projector until the projector Temp LED and Lamp LED are lit up. This indicates
that the projector is in the firmware download mode.
10. Click [Reset Bus] to reset and verify good USB connection.
11.
Click
[Start
Download].
ViewSonic Corporation
file to update your projector.
[xxxxxxxxx.img]
16
Confidential - Do Not Copy
PJD6531w