4.2 Verifying the Repair
After repairing projector (Dissembling and assembling projector), Repair center should verify
the quality of repaired unit.
(1) Check Logo
Check Logo is correct after power on the projector.
(2) Signal test (Each I/O can function normally)
Connect all connector to the jacks one after the other to check whether each channel can
project normally
I/O port
Test Equipment
Signal format
I/O port
Test Equipment
Signal format
I/O port
Test Equipment
Signal format
ViewSonic Corporation
Monitor In (VGA)
Standard Pattern generator (Ex. Quantum data)
1024*768 60Hz
Video
Standard Pattern generator (Ex. Quantum data) or DVD player
NTSC
S-Video
Standard Pattern generator or DVD player
480i
36
Confidential - Do Not Copy
PJD6531w