Usb Operations - JVC KW-AVX800 Instructions Manual

USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *
to the unit.
~
Ÿ
Press [SOURCE], then press [USB].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
This unit can play the DivX/JPEG/MPEG1/MPEG2*
3
MP3/WMA/WAV/AAC* files stored in USB mass
storage class device.
• You can operate the USB device in the same way you
operate the files on discs (except OSD operation and
those on the external monitor). ( page 15 to 25)
• All tracks in the USB device will be played repeatedly
until you change the source.
• You cannot select "USB" when Dual Zone is in use.
• Make sure all important data has been backed up.
1
* Except for JVC D. Player XA-HD500.
2
* Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
3
* This unit can play back AAC files encoded using
iTunes. This unit cannot play back AAC files purchased
from the iTunes Store.
USB cable from the rear of the unit
You cannot connect a computer to the USB (
•
( page 9)
2
/
Caution:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while "Now Reading..." is flashing on
the monitor screen.
• Do not start the car engine if a USB device is
connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
32
1
, portable HDD, etc.
) terminal of the unit.