Check Digit And Variable Length Label Selections - PSC QuickScan 6000 Programming Manual

• Set Second Fixed Length — use this label to instruct the scanner
that the next two programming labels you scan will define the
second fixed label length. Again, this setting can be any even
number of digits between 02 and 50
• No Second Fixed Length — scan this label after setting the first
fixed length to instruct the scanner to recognize only the label
length chosen as the first fixed length.

Check Digit and Variable Length Label Selections

These programming labels determine whether you compute and send the
check digit contents.
If you want to set the scanner to read only fixed length labels, follow the
procedures on the pages immediately following.
SET ----------------------------------------------
D
ON
C
OMPUTE
D
ON
T
RANSMIT
E
NABLE
D
ISABLE
END ----------------------------------------------
* For variable length symbologies, the QS6000/6000 Plus will decode up to 50 characters, but
the actual length varies with label size and quality. The IBM POS interface is limited to 32
characters labels.
64
' C -------------------
T OMPUTE
---------------------------
' T -------------------
T RANSMIT
---------------------------
-----------------------------
-----------------------------
QuickScan 6000/6000 Plus Programming Guide
*
digits.