ECS P6VEMD User Manual page 60

Serial Port2 Mode (Normal)
Use this item to allocate the resources of the second serial port. Under Nor-
mal, the resources are allocated to the onboard serial port. Under ASKIR or
IrDA, the resources are allocated to the onboard IR port.
OnBoard Parallel Port (Auto)
This option specifies the base I/O port address for the parallel port on the
mainboard.
Parallel Port Mode (ECP)
This option specifies the parallel port mode.
Parallel Port IRQ (Auto)
Use this item to assign either IRQ 5 or 7 to the parallel port.
Parallel Port DMA (Auto)
Use this item to assign a DMA channel to the parallel port. The options are 0,
1 and 3.
Onboard Game Port (201)
This item allows you to select the Game Port Address.
Onboard MIDI Port (330)
This item allows you to configure the onboard MIDI port.
MIDI Port IRQ (10)
This item allows you to select the MIDI Port IRQ.
Onboard IDE (Both)
This option specified the IDE channel used by the onboard IDE controller.
RTL8100B LAN Support (Enabled)
Enabled this item if your system supports an onboard LAN.
RTL8100B Boot ROM Support (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a
network add-in card with a remote boot ROM installed.
Onboard AC'97 Audio (Enabled)
Enables and disables the onboard audio-chip. Disable this item if you are go-
ing to install a PCI audio add-in card.
36