EXCELL PRECISION CO., LTD.
2-3-4 Restore to the Default Setting
Select
the default setting.
ACTIONS
Press TARE key
Use ON/ZERO or UNITS keys
to select "return" or "format"
Press TARE key
Key in the parameter "00"
Press TARE key to complete the
general setting procedures
The default setting includes the following:
1) External weight calibration
2) HI/LO/OK setting value
3) Noise filter setting (External)
4) Sampling setting for the counting function
Setting is only available for non-approval models.
02005316
in the General Function setting mode
DISPLAY
restoration)
setting
ON/ZERO key ⇒ Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
15
to restore to
NOTE
⇒ Return (Cancel the
⇒ Restore to the default
ZSME3000000306