Cd Tray Alignment - Sony Playstation 2 Repair Manual

CD TRAY ALIGNMENT

Fix for disc tray not opening after console has been dropped
This procedure will not fix all consoles that have a disc tray that won't open. There are other problems that can
cause this problem as well. In most cases this will only work on consoles that won't open, but that still have the
blue light on the eject button.
Flip your PS2 over so that the bottom is facing up.
Remove all the screw covers. (
There should be 6 screw
covers, 4 made of rubber (outer edges) and 2 made of
plastic (in the middle), that need to be removed. Indicated
in photo by the white lines. You can use a knife or small
jewelers flat blade screwdriver for this. There should be 2-4
more screw covers on the outer side of the base,
underneath the controller ports. Indicated in photo by red
lines. The older model PS2's have 4 screw covers, while
the newer ones have only 2. Remove them all, and you
should now have a total of 8-10 screws unveiled.
Set the screw covers aside.
24