Acer AcerPower Flex4000 Series User Manual page 64

3. Highlight the Setup Password parameter and press the
prompt appears:
4. Type a password. The password may consist of up to seven characters.
5. Press . A prompt asks you to retype the password to verify your first entry.
6. Retype the password then press
After setting the password, the system automatically sets the Setup Password
Present
parameter to
7. Press to exit the System Security screen and return to the Main menu.
8. Press to exit the BIOS utility. A dialog box appears asking if you want to save
the CMOS data.
9. Select Yes to save the changes and reboot the system.
10. While rebooting, turn off the system then open the housing.
11. Set JP22 to 1-2
The next time you want to enter the BIOS utility, you must key in your Setup password.
AcerPower Flex4000 Series (V59LA/IDB3-C) User's Guide
Be very careful when typing your
password because the characters
do not appear on the screen.
.
to enable the password function.
.
or key. The password