Acer AcerPower Flex4000 Series User Manual page 108

Removing LANDesk Client Manager
To remove the LANDesk Client Manager, on your Windows desktop:
•
Click Start | Settings | Control Panel.
•
Double-click Add/Remove Programs.
•
Double-click LANDesk Client Manager.
•
Follow the instructions to completely remove LDCM.
Reinstalling LDCM
Use the procedure below to remove the DMI service provider if the following message
appears when you are reinstalling LDCM:
"The Microsoft Windows accessory, Desktop Management, is currently installed on
this workstation.
installed."
•
Click Start | Settings | Control Panel.
•
Double-click the Add/Remove Programs icon.
•
Click the Windows Setup tab.
•
Double-click Accessories and uncheck Desktop Management.
•
Click OK.
•
From the Add/Remove Programs Properties dialog click OK.
Once you have uninstalled Desktop Management, re-run Client Manager SETUP.
AcerPower Flex4000 Series (V59LA/IDB3-C) User's Guide
LANDesk Client Manager can't run while this accessory is