A.4 Operating The Cd-Rom Drive - Acer AcerPower Flex4000 Series User Manual

1. Power supply connector connects the CD-ROM drive to the computer's power
supply
2. Interface connector connects the CD-ROM drive to the 40-pin interface cable
3. Device configuration jumper. The CD-ROM drive is configured as a master drive,
so a jumper is installed on "MA". To change the setting to slave, remove this jumper.
4. Digital Audio Output offers high quality Audio, through a digital signal from a D/A
converter
A.4 Operating the CD-ROM Drive
A.4.1 Starting the Drive
1. Press the Eject button. The tray is ejected from the drive.
2. Place the disc in the tray with the disc label side facing up.
3. Press the Eject button or press the tray panel lightly to close the tray.
4. Press the Audio Play/Skip track control button to play or skip one track of Audio
CD without executing application software.
•
Do not force the tray to open manually.
•
When not using the drive, keep the tray closed to prevent dust and dirt
contamination.
•
Do not press down hard on the tray when loading a disc, as it could damage the
tray and may cause the drive to malfunction.
•
Do not insert any foreign objects into the disc tray.
Index