Answering Priority; Meet-Me Conference - NEC DS1000 Product Description

Section 3: Features

Meet-Me Conference

76 N Section 3: Features

Answering Priority

When multiple calls ring an extension simultaneously, the system services the ringing calls in the
following order:
1. ICM Key
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
Feature Operation
To answer a call on a Loop Key:
1. Lift handset + Press Switched Loop Key.
To place a call on a Loop Key:
1. Lift handset + Press Loop Key + Dial trunk group code (0-8) + Dial outside number.
Set up a multiple-party
telephone conversation with
your co-workers.
without leaving the office. Users must join the meeting within the Meet-Me Conference interval.
The system has two Meet-Me Conference codes (#11 and #12). After a Meet-Me Conference is set up
and the Meet-Me Conference interval expires, the code used becomes available for a new meeting.
Since Meet-Me Conference is a type of Conference, the system's Conference capacity determines:
The number of users that can join a Meet-Me Conference
G
and
The number of simultaneous conferences.
G
The following table shows the Conference capacities:
Conference circuits
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
Maximum simultaneous conferences
Maximum parties in any one Conference
(trunks and/or extensions)
The system's 32 Conference circuits are dynamically allocated as users request them.
Availability: All versions.
With Meet-Me Conference, an extension user can set up a tele-
phone meeting with their co-workers. Each party joins the Con-
ference by dialing a Meet-Me Conference code. Meet-Me
Conference lets extension users have a telephone meeting —
Description Capacity
32
32
8
8
DS1000/2000 Product Description